This type of issue is to occur when a custom operating system limits restrict the max number of processes that can be executed.
More often the Nagios users come across this type of issue. Displaying one of our client’s reports on the screen that has some issues with the Nagios check, Also, found ‘Failed to register iobroker for stdout’ in the logs.
Our technical team support will fix failed register to iobroker in Nagios under our server management plan. You can also take assistance from our technical team support 24/7 for fixing the error or any sort of installation and migration
Reason to cause – failed to register iobroker.
Before we dig deeper into the solution part, let have a glance at the reason that cause this issue.
Following is the configuration for that particular check is
define service {
service_description fan
check_command check_cisco!snmpcommunitystring!sky@15
host_name SW-SRA-03
check_period 24×7 1/min 1/w
notification_period 24×7 1/min 1/w
contact_groups +admins,EuroFiber WAN
action_url /sky4nagios/graph?host=$HOSTNAME$&srv=$SERVICEDESC$
max_check_attempts 10
check_interval 10
retry_interval 1
first_notification_delay 10
notification_interval 9999
notification_options w,u,c,r,f,s
active_checks_enabled 1
passive_checks_enabled 1
notifications_enabled 1
check_freshness 1
freshness_threshold 3600
event_handler_enabled 0
}
Output
Current Status: OK (for 1d 12h 9m 7s)
Status Information: Fans: OK – 2 Fans are running all good
Performance Data: total=2 err=0
Current Attempt: 1/10 (HARD state)
Last Check Time: 01-04-2021 09:28:18
Check Type: ACTIVE
Check Latency / Duration: 0,000 / 0,000 seconds
Next Scheduled Check: 01-04-2021 09:38:18
sometimes the check ends suddenly by showing some strange core worker errors in the Nagios.log.
The following what you see in the log.
Failed to register iobroker for stdout
Failed to register iobroker for stderr
such type of error is used to happen when the core worker tries to get the hold of stdout and stderr this finally leads to the error or fails. However is still launches the check, even though it will not be able to catch the output. At times, many different checks can fail at that time.
The following is the error which can be seen in the nagios.log file
The following errors can be seen in the nagios.log file:
[1504231962] wproc: Core Worker 68003: Failed to register iobroker for stdout
[1504231962] wproc: Core Worker 68003: Failed to register iobroker for stderr
[1504231962] Warning: Check of host ‘SOME_HOST’ did not exit properly!
[1504231962] HOST ALERT: SOME_HOST;UNREACHABLE;SOFT;1;(Host check did not exit properly)
This is due to the custom operation system limits restrict
Generally, custom limits are defined in the /etc/security/limits.conf file.
This is one an example of limits in an openSUSE Leap 42.x:
# harden against fork-bombs
* hard nproc 1700
* soft nproc 1200
root hard nproc 3000
root soft nproc 1850
fixing the issue
By increasing the hard and soft values you can solve the problem.
example:
># harden against fork-bombs
* hard nproc 10000
* soft nproc 10000
root hard nproc 10000
root soft nproc 10000
Ensure reboot the system after making necessary changes.
Conclusion
In brief, the issue is caused when a custom operating system limits restrict the max number of processes that can be executed. Need assistance fixes the error consult our technical team support to resolve the error on your behalf.
